FiberCut ST & FiberCut RA

FiberCut ST, FiberCut RA and FiberCut RAc

The FiberCUT series RA, RAc and ST (up to 4 kW laser power) collimate and focus the fiber laser beam and feed it with process gas through the nozzle to achieve optimal cutting results. These cutting heads also have the automated stand-by function to the component, which always leads to the correct working distance with the aid of the sensor and direct connection to the movement platform. Especially these three variants of the FiberCut are ideally suited for use with an automated robot arm (16 kg robot) due to their compact design and the very low weight. This makes it possible to implement 3-dimensional applications perfectly.

Advantages of the FiberCut ST:

• 3-dimensional cutting with fiber-coupled laser with 16 kg robot
• Low process head mass minimizes inertial transfer to robot arm
• Internal process sensor is not sensitive to cutting plasma and piercing particles
• Suitable for laser power up to 4 kW and wavelengths of 1064/1080 nm
• Designed for demanding and extreme industrial conditions

Additional features of the FiberCut RA:

• Right-angle entry geometry from all connections allows for high degrees of freedom to the component,
  easy cable laying and stress reduction of the process fiber

Additional features of the FiberCut RAc:

• 30% smaller than original FiberCut RA

• Right-angle entry geometry from all connections allows for high degrees of freedom to the component, 

  easy cable laying and stress reduction of the process fiber

Applications: Laser Cutting, Robot Cutting Application

Data sheets: FiberCut ST | FiberCut RAc

FiberMini ST & FiberMini RA

FiberMini ST and FiberMini RA

The FiberMini ST and the FiberMini RA (up to 2 kW laser power) are simple yet flexible, which allows Laser Mech to optimize the processing head for the fiber laser of the end user. The head can cut a variety of materials and is also available in various welding designs. The FiberMini ST and RA provide both user-friendly operation and reliable performance at an attractive cost.

Advantages of the FiberMini ST and FiberMini RA:

• Available with and without capacitive height scanning
• Temperature sensors protect the optics and minimize the risk of overheating
• 10 mm lens movement for sharp adjustment
• Quick and easy access to the cover glass
• Flexible design to optimize the spot size
• Uniform cutting gas throughput
• Compact and lightweight design
• Models available for the most common fiber couplings

Applications: Laser Cutting

Data sheets: FiberMini ST 

FiberWeld & FiberWeld HR+

FiberWeld and FiberWeld HR+

The FiberWeld and the FiberWeld HR (up to 8 and 30 kW laser power) were developed for a particularly high load factor in production welding with a fiber-coupled laser. The cabling is integrated into the robust head, the connections for coolant and gases are kept simple. The easy-access and well-protected cover glass of the FiberWeld series helps to extend the life of the internal optics. According to the processing requirements of the end user, the FiberWeld can be provided with straight or right angled fiber inputs, camera viewing, cable feed, air knife, coaxial nozzle, welding monitoring and special focus optics (twin spot and right angle).

Advantages of the FiberWeld:

• For all fiber-guided laser systems up to 8 kW
• Fiber collimator of 100 mm - 190 mm
• Focusing lenses from 200 mm - 10000 mm
• Available with either straight or optional 90 ° left-handed / right-handed fiber connection
• Temperature monitored optics
• Cover glass with contamination monitoring / warning
• Cross-flow air sensor with 360 ° adjustment
• All optics are recessed to avoid contamination of process vapors or particles
• Compatible with all common welding monitoring systems
• Faster and easier access to the cover glass (no tools required)

Additional advantages of FiberWeld HR:

• Robust, directly cooled and reflective optics minimize focus shift

• For all fiber guided laser systems up to 30 kW

Applications: Laser Welding, Laser Hardening

Data sheets: FiberWeld - FiberWeld HR

FiberMini Weld

FiberMini Weld

With a base area of only 55 mm side length around its center, the FiberMini Weld is a highly compact and lightweight welding head for all fiber-guided solid-state lasers up to 4 kW. The FiberMini Weld has a simple yet flexible design that allows LaserMech to tailor the machining head to the needs of the end user. Easily accessible cover glass and good protection of the optics against contamination. The fiber inputs of the FiberMini Weld are either straight or right, guaranteeing user-friendly operation and reliable performance at an attractive price.

Advantages of the FiberMini Weld:

• Available in focal lengths up to 400 mm
• Focus setting of 10 mm
• Compact lightweight construction
• Optional camera viewing
• Effective air knife, which increases the life of the cover glass
• Quick and easy access to the cover glass
• Flexible design for optimum spot size

Applications: Laser Welding

Data sheet: FiberMini Weld

Beam Delivery Systems

Laser Mechanisms is the recognizable world leader of the design and production of laser beam components and freely movable arm systems. Laser Mech products are used in all industrial applications. Over the years, the company has developed many innovations to improve the performance, safety, capabilities, ease-of-use and cost-effectiveness of laser processes. In the area of the beam guidance, a distinction is made between large and small apparatus (suitable for Iradion CO2 lasers). Components are, for example:

• AccuCutter System
• AccuFocus System
• Parabolic Welding System
• Beam Bender
• Beam Shuttle
• Beam Splitter
• Collimator
• Feedback Isolator

Applications: Laser Cutting, Laser Welding, Laser Scribing, Surface Processing

Spare Parts

If your laser beam guidance systems or components are no longer functional and require an exchange of optics, nozzles, lines, then Laser Mech has all the spare parts of all well-known industrial manufacturers in this area.

Catalogue: Spare parts